Table of Contents
Advertisement
Rigid T-Top with Storage Box and Outriggers (Optional)
When factory installed, this options includes the same frame and storage box as above. However, with the
installation of the outriggers, we have included mounting pads for additional support.
When this option is selected and factory installed, the outrigger installation includes a pair of outrigger bases,
poles and lines. The bases are constructed of anodized aluminum and are installed on the port and starboard
sides of the optional T-top. Turn the handle at the bottom of the outrigger base to rotate the outriggers 90
degrees (from the side to the aft end of the boat).
Bimini Top (Optional)
An optional Bimini top can be installed to provide you and your passengers with plenty of shade during your
voyage. The frame is made of anodized aluminum
The Bimini top comes with a cover/boot to protect the top
when it is not in use. Both the Bimini top and Bimini boot are made of Sunbrella canvas.
The Bimini top should not be left up when transporting the boat on the highway.
Therefore, whenever
transporting the boat on a trailer, you should remove the pins that hold the Bimini top upright and secure the
canvas top in the Bimini boot. Depending on the speed in which you are traveling, you may want to secure the
top further.
See the Service and Care section of this manual for cleaning recommendations.
Vinyl Upholstery
Please see the Service and Care section of this manual for information on how to clean and care for your seat
cushions and cockpit bolsters.
Electronics (Optional)
Based upon the availability from our vendors, this equipment changes from time to time. Therefore, we request
that you refer to the owner's manual provided by the manufacturer of your electronics equipment for operational
procedures and for information related to the warranty and the care and maintenance of their product. Refer to
your owner's package for additional information.
33
Advertisement
Table of Contents
