(19) Image is not square.
Causes
1. Laser scanner unit positioned incorrectly.
2. Image scanning unit positioned incor-
rectly.
(20) There is a regular error between
the centers of the original and
copy image when the DP is used.
Causes
1. Misadjusted center line.
(21) There is a regular error between
the leading edges of the original
and copy image when the DP is
used.
Causes
1. Misadjusted original scanning start posi-
tion.
1-5-56
Causes
1. Laser scanner unit positioned incorrectly.
2. Image scanning unit positioned incorrectly.
Check procedures/corrective measures
Adjust the installation position of the laser scanner unit
(see page 1-6-49).
Adjust the installation position of the image scanning unit
(see page 1-6-50).
Causes
1. Misadjusted center line.
Check procedures/corrective measures
Readjust the DP center line (see page 1-6-92).
Causes
1. Misadjusted original scanning start position.
Check procedures/corrective measures
Readjust the DP leading timing (see page 1-6-93).
Service Manual
Y104350-7