Table of Contents
Advertisement
(8-4) Adjusting the margins for printing
Make the following adjustment if the margins are not correct.
U403
U402
(P. 1-6-55)
<Caution>
Check the copy image after the adjustment. If the margins are still incorrect, perform the above adjustments in mainte-
nance mode.
<Procedure>
Start
Enter maintenance mode.
Enter 402 using the numeric keys.
Press the start key.
Select the items
to be adjusted on the touch panel.
Press the interrupt key.
Press the start key to output a test
pattern using A3/11" x 17" paper.
Are the margins correct?
Yes
Proceed to
another mode?
Press the stop/clear key.
Exit maintenance mode.
End
1-6-28
U404
(P. 1-6-95)
Touch panel display
LEAD: Printer leading edge margin
A: Printer left margin
C: Printer right margin
TRAIL: Printer trailing edge margin
TRAIL (DUP): Printer trailing edge margin
No
Setting range (initial setting)
Yes
Printer leading edge margin: 0.0 to +10.0 (+3.0)
Printer left margin: -3.4 to +10.0 (+3.2)
Printer right margin: -5.0 to +10.0 (+3.2)
Printer trailing edge margin: -5.0 to +10.0 (+5.0)
Printer trailing edge margin for duplex copying
No
Increasing the value makes the margin wider and decreasing
it makes the margin narrower.
Changing the value by 1 moves the margin by 0.1 mm for all.
Printer leading edge margin
(3 1.0 mm)
Printer
left margin
+
(3 1.0 mm)
-
Printer trailing edge margin
(3 1.0 mm)
Press the start key.
The new setting is stored.
Change the setting using
the cursor up/down keys.
(second face): -5.0 to +10.0 (+5.0)
+
-
Printer
right margin
+
(3 1.0 mm)
-
+
-
Normal copy mode
(A3/11" x 17")
Service Manual
Ejection direction
(reference)
Printer trailing edge margin
for duplex copying (3 1.0 mm)
Duplex copy mode
(second face, A3/11" x 17")
Figure 1-6-54
+
-
Y104350-7
Advertisement
Table of Contents
