Table of Contents
Advertisement
Maintenance
item No.
Adjusting the scanner automatically
U092
Description
Makes auto scanner adjustments in the order below using the specified original.
Adjusting the scanner center line (U067)
Adjusting the scanner leading edge registration (U066)
Adjusting the scanner magnification in the auxiliary direction (U065)
When this maintenance item is performed, the settings in U065, U066 and U067 are also changed.
Purpose
To make respective auto adjustments for the scanner.
Method
1. Place the specified original on the contact glass.
2. Press the start key. The screen for executing is displayed.
3. Press the start key. Auto adjustment starts. When adjustment is complete, each adjusted value is dis-
played.
Display
SCAN CENTER
SCAN TIMING
SUB SCAN
MAIN SCAN
SCAN A MARGIN
SCAN B MARGIN
SCAN C MARGIN
SCAN D MARGIN
If a problem occurs during auto adjustment, DATA: XX (XX is replaced by an error code) is displayed
and operation stops. Should this happen, determine the details of the problem and either repeat the pro-
cedure from the beginning, or adjust the remaining items manually by running the corresponding main-
tenance items.
Since the scanner magnification in the main direction is not automatically adjusted, use U065 for this
adjustment.
Completion
Press the stop/clear key after auto adjustment is complete. The screen for selecting a maintenance item No.
is displayed.
If the stop/clear key is pressed during auto adjustment, adjustment stops and no settings are changed.
1-4-26
Description
Setting
Scanner center line
Scanner leading registration
Scanner magnification in the auxiliary direction
Scanner magnification in the main scanning direction
Scanner reading margin (A side)
Scanner reading margin (B side)
Scanner reading margin (C side)
Scanner reading margin (D side)
Service Manual
Y104350-7
Advertisement
Table of Contents
