Table of Contents
Advertisement
Maintenance
item No.
Setting the fuser web drive
U194
Description
Sets the interval (number of copies) for turning on the fuser web solenoid.
Purpose
To be executed when the fuser web roller becomes extremely soiled.
Method
Press the start key. The screen for adjustment is displayed.
Setting
1. Change the setting using the cursor up/down keys.
Setting
Interval for turning on the fuser web solenoid
2. Press the start key. The value is set.
Completion
To exit this maintenance item without changing the current value, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
Turning the fuser heater on
U196
Description
Turns the fuser heater M, S or L on.
Purpose
To check fuser heater turning on.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the heater to be turned on. The selected heater turns on for 2 s and then turns off.
Display
FIX HEAT M
FIX HEAT S
FIX HEAT L
Completion
Press the stop/clear key when fuser heater M, S and L are off.
The screen for selecting the maintenance item No. is displayed.
Setting the fuser phase control
U198
Description
Sets the use of fuser phase control to reduce electrical noise generated by the copier.
Purpose
Normally no change is necessary.
If electrical noise generated by the copier causes flickering of the lights around the copier, select fuser phase
control to reduces the noise.
Method
Press the start key. The screen for adjustment is displayed.
Setting
1. Select ON or OFF. The selected item is displayed in reverse.
Display
ON
OFF
Initial setting: ON (220-240 V specifications) / OFF (120 V specifications)
2. If you select ON, use the * or # key to set 0 (100 V system fuser heater phase control) or 1 (200 V sys-
tem fuser heater phase control).
3. Press the start key. The value is set, and the maintenance mode is exited.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
Y104350-7
Description
Setting range
0 to 255
Description
Fuser heater M (FH-M)
Fuser heater S (FH-S)
Fuser heater L (FH-L)
Description
Fuser phase control present
Fuser phase control absent
Sevice Manual
Default setting
30
1-4-39
Advertisement
Table of Contents
