(2) Detaching and refitting the drum heater
Follow the procedure below to replace the drum.
Procedure
1. Remove the drum (see page 1-6-56).
2. Remove two screws and then remove the
front drum flange from the drum.
3. Remove two connectors connected to the
inner side in the front drum flange.
4. Pull out the rear drum flange slowly from the
drum with the drum stay, and remove the
connector.
Y104350-7
Front drum flange
Drum
Drum stay
Drum
Sevice Manual
Connector
Figure 1-6-106
Figure 1-6-107
Connector
Rear drum
flange
Connector
1-6-57