Sun Oracle SPARC T4-1 Installation Manual page 64

4. Set the netmask for the SP.
-> set /SP/network pendingipnetmask=255.255.255.0
Set 'pendingipnetmask' to '255.255.255.0'
This example uses 255.255.255.0 to set the netmask. Your network
environment subnet might require a different netmask. Use a netmask number
most appropriate to your environment.
5. Use the show /SP/network command to verify that the parameters were set
correctly.
-> show /SP/network
/SP/network
->
6. Commit the changes to the SP network parameters.
-> set /SP/network commitpending=true
Set 'commitpending' to 'true'
56 SPARC T4-1 Server Installation Guide • August 2013
Targets:
interconnect
ipv6
test
Properties:
commitpending = (Cannot show property)
dhcp_server_ip = none
ipaddress = xxx.xxx.xxx.xxx
ipdiscovery = static
ipgateway = xxx.xxx.xxx.xxx
ipnetmask = 255.255.252.0
macaddress = xx:xx:xx:xx:xx:xx
pendingipaddress = xxx.xxx.xxx.xxx
pendingipdiscovery = static
pendingipgateway = xxx.xxx.xxx.xxx
pendingipnetmask = 255.255.255.0
sidebandmacaddress = xx:xx:xx:xx:xx:xx
state = enabled
Commands:
cd
set
show