Verify Correct Operation Of The Slide Rails And The Cma - Sun Oracle SPARC T4-1 Installation Manual

Hide thumbs Also See for SPARC T4-1:

Table of Contents

▼ Verify Correct Operation of the Slide

Rails and the CMA

Perform this procedure both before and after you install the server cables in the

CMA. Performing the procedure before the CMA contains cables helps ensure that it

extends and contracts smoothly before the cables are added.

Note – The CMA includes velcro straps to secure the cables inside the CMA. Do not

install the velcro straps until you have installed the CMA, connected the cables, and

placed the cabling inside the CMA.

Tip – Two people are needed for this procedure, one to move the server in and out

of the rack, and one to observe the cables and CMA.

1. For a free-standing rack, deploy the antitilt bar.

2. Unlock the slide lock buttons at the right and left sides of the chassis.

SPARC T4-1 Server Installation Guide • August 2013

Table of Contents

Chapters

Table of Contents

Do you have a question about the SPARC T4-1 and is the answer not in the manual?