Replacing The Control Panel Holder - Otto Bock B400 Service Manual

The control panel – version A – has supplementary keys for controlling the lighting function:
Key
Light key
Warning flasher key
Direction indicator right/
left
Table 3 Supplementary function keys on control panel – version a –

6.8.2 Replacing the control panel holder

The control panel holder for the B400 power wheelchair is clamped to the underside of the
armrest with a linear guide.
Preparation:
❒ Remove the side panel.
❒ Remove and set aside the control panel.
Tools:
❒ Allen wrench, size 3
Steps:
1. Remove the side panel from the holder.
2. Loosen the two set screws.
3. Change the position of the control panel holder, or remove the control panel holder and
replace it if required.
fig. 27 Replacing the control panel holder
B400 Family
function
Turns the front/rear lights on and off
Turns the warning flasher on and off (all four direction indicators flash
simultaneously)
Turns the direction indicators on and off (indicators automatically stop
flashing after 20 seconds)
Service work
Ottobock | 33