Installing A Luggage Carrier (Option); Retrofitting With A Crutch Holder - Otto Bock B400 Service Manual

Service work

6.15.9 Installing a luggage carrier (option)

Preparation:
❒ First detach the rear lights if applicable.
Tools:
❒ Allen wrench, size 6
Steps:
1. Mount the luggage carrier to the prefabricated bore holes in the rear frame (see fig. 57).
fig. 57 mounting a luggage carrier

6.15.10 Retrofitting with a crutch holder

The crutch holder is screwed on to the side panel.
Preparation:
❒ Remove the side panel.
Tools:
❒ Allen wrench, size 3
❒ Ring or open-end spanner, size 8
❒ Flat screwdriver
Steps:
1. Unscrew the clothing protector. Hold the nuts laterally using a flat screwdriver in the process.
2. Use the longer screws supplied to remount the clothing protector.
3. Use the dome nuts/washers supplied to mount the crutch holder.
56 | Ottobock B400 Family