Steps:
1. Loosen all cables connected to the seat frame by cable ties.
2. Loosen the two Allen head screws on the front seat brackets.
3. Loosen the two Allen head screws on the rear seat brackets.
4. Remove the seat frame and replace it if required.
Properly reassemble all components upon completion of the work.
fig. 37
Standard seat: replacing the seat frame
6.10.4 Standard seat: Replacing the seat plate
Only standard seats have seat plates.
Steps:
1. Remove the seat cushion.
2. Pull the seat plate up with a sharp tug and replace it if required.
Properly reassemble all components upon completion of the work.
fig. 38
Standard seat: replacing the seat plate
B400 Family
Service work
Ottobock | 41