Replacing The Control Panel Holder - Otto Bock B400 Service Manual

The VR2-L control panel features additional keys to control the light function:
Key
Light key
Warning flasher key
Direction indicator right/left
Table 3 function of the additional keys of the VR2-L control panel

6.8.2 Replacing the Control Panel Holder

The control panel holder for the B00 power wheelchair is clamped to the underside of the
armrest with a profile rail.
Preparation:
Remove the side panel.
❒
Remove and deposit the control panel.
❒
Tools:
Allen wrench, size 3 mm
❒
Steps:
1. Remove the side panel from the holder.
2. Loosen the two set screws.
3. Change the position of the control panel holder or remove and replace the holder, if neces-
sary.
fig. 29 Replacing the control panel holder
3
function
Turns the front/rear lights on and off
Turns the warning flasher on and off (all four direction indicators flash
simultaneously)
Turns the direction indicators on and off (indicators automatically stop
flashing after 20 seconds)