Lightspeed Redcat User Manual page 25

INITIAL SET-UP:
OPTIONAL IR MEDIA CONNECTOR
1. Turn off the second microphone.
The iR Media Connector uses
the same channel (channel B) as
the optional second microphone
(Redmike or Redmike Share). As
a result, they cannot be used
simultaneously. If you have a
second microphone, turn it off
before transmitting audio from the
iRMC.
NOTE: If you adjust the CH B
volume on the classroom audio
system, you will also be changing
the volume for your second
microphone. Return the CH B
volume knob to the original
position before turning the second
microphone back on.
2. The iR Media Connector volume
is preset for most standard audio
signals. If you need to turn the
volume up or down, follow this
procedure:
A. Adjust the volume at the
computer, television, or other
audio source if possible.
B. If the audio source does not
have a volume control (such as
many DVD players) adjust the
volume at the iRMC.
C. If the first two options do not
give optimum volume level, the
last place to adjust the volume is
the CH. B volume on the Redcat.
CH A PWR CH B
25