Lightspeed Redcat User Manual page 23

REDMIKE SHARE: Charging
1. Ensure that the Redmike Share is
turned off.
2. Make sure the cradle charger
is plugged into a wall outlet.
Connect one end of the charging
cable into the jack labeled
CHARGER on the bottom of the
Redmike Share.
3. Plug the other end into the
charging jack on the rear of the
cradle charger.
4. The LED on the microphone will
glow red to indicate charging.
5. Leave the Redmike Share plugged
in overnight (8-10 hours) to obtain
a full charge. A blinking red
LED indicates that charging is
complete.
23