Chapter 2 Operating Instructions
2.1 Network Connection
After the IP camera series is installed, you can preview and configure the related parameters
through the browser.
2.1.1 Wired network connection
Before configuring the IP camera, make sure that the IP camera is connected to the computer
and that you can access the IP camera you want to set up. There are two types of wired
connections; you can directly connect the IP camera to the computer with a network cable as
shown in Figure 2-1:
Setting up IP cameras over the LAN via a switch or a router is shown in Figure 2-2:
User's Manual of ICA-3480F/ICA-4480F
Figure 2-1
Figure 2-2
10