System Menu Option 6, Test Report - GE AL-1103 User Manual

As shown in the example above, the display shows:
• The time of the event in hours and minutes – HH:MM
• The date of the event as day and month – DD/MM
• The type of event such as Menu Entered.
• The location of the event such as Keypad 1.
• The user's number and name (off display).
Table 15 lists the display options.
Table 15. History system display options
Option
Scroll forward through the event list one by one.
Scroll backward through the event list one by one.
Exit menu 5.
Scan the display to view all details for an event (such as
user name and number).
Exit the menu option and return to the original display.

System menu option 6, Test report

Use this menu to display the results of the Disarm Test or Arm Test:
Disarm Test Report: This test report indicates if specific zones and cameras are operating correctly. The
zones need to be programmed to be included in the test, and operate when areas are disarmed. All cameras
are tested.
The results of the camera tests are only displayed if the user doing the disarm test has been programmed to
test cameras. The area being tested must also be assigned to the user alarm group.
Arm Test Report: This test indicates if specific zones are operating correctly. The zones need to be
programmed to be included in the test, and operate when areas are armed.
Note: If a zone is displayed as untested, it could mean that it has not been tested because it was missed, or because it was
faulty and could not be tested.
Action
Press ENTER.
Press MENU*.
Enter 0.
Enter 1.
Press ENTER.
Chapter 2
Alliance system menu
31