GE AL-1103 User Manual page 51

To program a user if two users are required
To program a user if two users are required, do the following:
1. Press MENU* (Figure 1), enter your user
PIN code, and press ENTER
(Figure 1).
2. Enter 14 (for menu 14) and press ENTER. If
your system requires two users to access this
menu, the keypad displays the window
shown in Figure 55.
3. Enter the second user's PIN code and Press
ENTER.
4. Select the function you want to perform and
press ENTER (Figure 56).
or
Press ENTER to return to the menu.
Delete a user
To delete a user, do the following:
1. Press MENU* Figure 1), enter your user
PIN code, and press ENTER Figure 1).
2. Enter 14 (for menu 14) and press ENTER.
The keypad displays the delete a user
window (Figure 57).
3. Enter 1 and press ENTER to delete a user.
4. Enter the system user number and press
ENTER (Figure 58). This will delete the
user.
5. Repeat step 2 to delete other users, or press
ENTER to exit and return to the option
menu.
Note: You cannot delete a user unless your alarm
group authorizes you to do so.
Figure 55. Second user access code
Enter Second Code
Code:
Figure 56. Two user option
1-Delete 2-Display 3-Create 4-Total
Option:
Figure 57. Select delete a user
1-Delete 2-Display 3-Create 4-Total
Option:
Figure 58. User number entry
Delete User
Code No:
Chapter 2
Alliance system menu
45