System Menu Option 8, Film Counters - GE AL-1103 User Manual

36 Alliance System
User Manual
Dial temporary management software
This option allows a temporary telephone number to be programmed and dialed by the system.To dial
temporary management software, do the following:
1. Enter 4 and press ENTER. The keypad
displays the dial temporary management
software window (Figure 34).
2. Enter the temporary service telephone
number (up to 10 digits) and press ENTER.
And/Or
3. Press ENTER to save the displayed
telephone number.
Note: If this option is used to make the connection to the
remote computer, the computer operator will not be
required to use the security password to gain access
to the control panel.

System menu option 8, Film counters

Use this menu to display the current frame number position on each of the security camera films. Up to eight
cameras can be displayed. If you maintain a log on film counts, it will indicate whether the cameras have
operated since they were last checked.
Note: If a camera is fitted with a film-out detector and that camera does not have film in it, the frame count will be displayed
as OUT. OUT is removed when film is loaded.
Display the current frame number on the security camera film
To display the current frame number on the security camera film, do the following:
1. Press MENU* (Figure 1), enter your user
PIN code, and press ENTER
(Figure 1).
2. Enter 8 (for menu 8) and press ENTER. The
keypad displays the security camera current
frame number window (Figure 35).
3. Press ENTER to move the film count
display for cameras 5 to 8. The keypad
displays the film count (Figure 36).
Note: A camera position that does not have a
camera fitted will display the frame count
as ----.
4. Press ENTER to return to the menu.
Note: A frame count can be from 0 to 9999.
Figure 34. Dial temporary management software
"*" Pause, Ph No:
Serv No:
Figure 35. Security camera frame number
Film Counts 1: 0123 2:1077 3:0056 4:----
Press ENTER
Figure 36. Film count display
Film Counts 5:---- 6:---- 7:---- 8:----
0-Exit, Menu: