System Menu Option 1, Panel Status - GE AL-1103 User Manual

26 Alliance System
User Manual

System menu option 1, Panel status

Use this menu to list all zones that are in alarm, tamper alarm, bypassed, or active and to list any system
alarms. There are other menus available that display each of these conditions separately, but this menu can be
used to check on all zones that need attention. Table 10 lists the panel status codes, the status, and their
meaning. The letter that precedes the zone number indicates the status of the zone.
Table 10. Panel status menu 1 codes
Code
A
T
i
a
List the status for all zones
To list status for all zones, do the following:
1. Press MENU* (Figure 1), enter your user
PIN code, and press ENTER.
2. Enter 1 (for menu 1) and press ENTER
(Figure 1).
3. The display that appears depends on the
status of the zones (Figure 12).
4. Press ENTER to exit menu 1.
If zones are in alarm, tamper, bypassed, or active, one of the following displays will show with a list of zones
either one at a time or as a list of zone numbers.
Or
Table 11 lists the display options.
Zone status
Alarm
Tamper alarm
Bypassed
Active
Meaning
An alarm has occurred at this zone and must be acknowledged and reset.
An alarm has occurred at this zone due to tamper or accidental damage. The
alarm must be acknowledged and reset.
The zone has been excluded from functioning as part of the security system. It is
probably broken or faulty.
The zone is activated and needs to be checked and fixed if necessary to ensure
security is maintained (e.g. close the door).
Figure 12. Zone status
No Alarms, Tampers, Bypasses, Active
Press ENTER
Summary On A2, Front Door
Contact
Summary On A1, A3, T4, I5
Zone No: