Selecting A Menu Option; Changing A Menu Option; Changing Selection List Entries; Changing Binary Entries - GE CS5500 Programming Manual

4.
5.
2.4

Selecting a menu option

•
•
•
•
2.5

Changing a menu option

The CSx75 has several editors that you can use to change the value of certain
programmable menu options. You can change selection list entries, binary entries, phone
numbers and text. This section describes how to change selection list entries, binary
entries, numeric entries and phone numbers. For information on changing text, see page
14.

2.5.1 Changing selection list entries

1. Navigate with the
2.
3.
4.
5.

2.5.2 Changing binary entries

1.
2.
3.
4.
5.

2.5.3 Changing numeric entries

1.
2.
3.
Press OK at the system prompt.
Press the keys to enter and navigate the command menu.
Press OK to select a menu option and move forward in the menu structure.
Press NO to reject a menu option and move backwards in the menu structure.
Press F1 to move through the second line of the LCD display, one word at a time,
from right to left.
Press F3 to move through the second line of the LCD display, one word at a time,
from left to right.
keys to the relevant menu option and press OK.
The current value for the menu option is displayed, for example, Enabled.
Press the keys to change the value, for example, change Enabled to Disabled.
Press OK to accept the change.
•
If the new value is valid, the keypad beeps once to confirm the change and
returns to the menu option.
•
If the new value is invalid, the keypad beeps three times to reject the change
and returns to the menu option.
Press NO to cancel the change and return to the menu option.
Navigate with the keys to the relevant menu option and press OK.
The current value for the menu option is displayed, for example, 1 2 3 - - - - 8 means
that 1, 2, 3 and 8 are on (included) while 4, 5, 6 and 7 are off (excluded).
Press the corresponding numerical key to change a value, for example, press 1 to
change the state of 1 to off and press 4 to change the state of 4 to on. The display
changes to - 2 3 4 - - - 8.
Press OK to accept the changes.
If the new values are valid, the keypad beeps once to confirm the change and
returns to the menu option.
If the new value is invalid, the keypad beeps three times to reject the change and
returns to the menu option.
Press NO to cancel the changes and return to the menu option.
Navigate with the keys to the relevant menu option and press OK.
The current value for the menu option is displayed, for example, 55.
Do one of the following: