GE AL-1103 User Manual page 20

14 Alliance System
User Manual
Programmed not to display areas assigned to your PIN code
All armed areas are automatically disarmed if your system has not been programmed to display the areas
assigned to your PIN code and the zones were not programmed for tamper. The display returns to that shown
above.When the disarming procedure has been successful the AL-1103 area LED goes off, and the AL111x
LED goes from red to green.
Programmed to display areas assigned to your PIN code
If a list of the areas assigned to your PIN code is displayed, all armed areas are now listed. For example:
Table 5 lists the display options.
Table 5. Disarm the system display options
Option
Disarm all areas at once and return to the original display.
Disarm the selected area. If there are more armed areas, they
will display.
Exit and return to the original display. Areas already disarmed
will stay disarmed.
Display the next armed area in the list. You can then select an
area to be disarmed, or continue to press ON/NEXT to scroll.
0-ALL 1, Office 2, Boardroom
Enter Area:
Action
Enter 0 and press ENTER (Figure 1 ).
Enter area number and press ENTER. When finished
disarming, press ENTER again.
Press CLEAR (see Figure 1 ).
Press ON/NEXT (see Figure 1 ).