Alliance System Menu - GE AL-1103 User Manual

24 Alliance System
User Manual

Alliance system menu

The Alliance system menu has 23 user option menus available for performing various user functions. Menu 19,
is reserved for the installer. Only those menu options that have been programmed to be available when your
PIN code is used are displayed.Some of the functions are specific to certain installations, while others are
reserved for authorized users. The manager PIN code is programmed to access a wider number of the menu
options than the general user.
If you access the menu and do not use any keys for two minutes, you will automatically exit from the menu. It
is a good practice to always exit from the menu using 0 ENTER or CLEAR rather than the time-out feature
because if anyone else uses the menu before it times out, the functions they use would be logged against your
PIN code.
If you attempt to select an option that is not authorized to your PIN, the display will show the message, You
Are Not Authorized To Enter.
Although you might be authorized to access a menu option, you might not be allowed to access all the
information it provides. You will only be allowed to access information on the areas assigned to your PIN code.
The next sections of this guide follow the sequence of the Alliance system menu options:
1 Panel Status
2 Active Zones
3 Zones in Alarm
4 Bypassed Zones
5 History
6 Test Report
7 Service Menu
8 Film Counters
9 List Zone Numbers
10 Bypass Zone
11 Unbypass Zone
12 Test Zone
13 Start Auto Disarm Test
14 Program Users
15 Time and Date
16 Bypass/Unbypass RAS/DGP
17 Enable/Disable Service Technician
18 Reset Cameras
19 Reserved for Installer
20 Door and Floor Groups
21 Holidays
22 Open Doors
23 Unlock, Lock, Disable, and Enable Doors
24 Print History