GE AL-1103 User Manual page 38

32 Alliance System
User Manual
Display the results of a test
To display the results of a test, do the following:
1. Press MENU* (Figure 1), enter your user
PIN code, and press ENTER (Figure 1).
2. Enter 6 (for menu 6) and press ENTER. The
keypad displays the test results opening
window (Figure 24).
3. Select the test report.
3a. Enter 1 and press ENTER for Disarm
Test
Or
3b. Enter 2 and press ENTER for Arm Test
4. Press ENTER to exit this men
Disarm test report
If you selected Disarm Test, the display will show the zone test report first, then the camera test report.
Disarm Zone Test Report. If all zones tested successfully the display shows:
To display the disarm zone test report, do the following:
1. Press ENTER (Figure 1) to view the camera
test report.
2. If untested zones are reported, the display
shows a list of untested zones either one at a
time (Figure 25) or as a list of zone
numbers (Figure 26).
Figure 24. Test results opening window
Test Report: 1-Disarm 2-Arm
Option:
No Untested Zones
Press ENTER
Figure 25. Untested zones listed one at a time
Untested Disarm On 25, Reception Hold.
Figure 26. Untested zones listed by number
Untested Disarm On 25, 26, 27
Zone No: