GE AL-1103 User Manual page 55

Table 25. Disarm test menu options.
Option Description
Two Cards If set to YES, the user will always require a second valid user code/card to
be entered to perform any alarm or access control functions at doors 17
to 64.
Guard If set to YES, the user's code/card can only perform functions at doors 17
to 64 when used in conjunction with a "Visitor" code/card
Visitor If set to YES, the user's code/card can only perform functions at doors 17
to 64 when used in conjunction with a "Guard" code/card.
Trace User If set to YES, all alarm and access functions performed by the user at
doors 17 to 64, will leave a "Trace" message to be sent to the
management computer.
Card Only If set to YES, the user will not be able to use a PIN code.
Privileged If set to YES, the user's code/card will over-ride any "Anti-Passback"
restrictions on doors 17 to 64.
Extended If set to YES, the user will be allowed extended door access times at doors
Access 17 to 64 (e.g. to allow the door to remain open longer for disabled access).
Entering a user name
Systems not programmed for user flags, or those with user numbers less than 200, display the user's name as
follows:
Note: You cannot create a user unless your alarm group authorizes you to do so.
Display
YES – Two Cards
*-Change, 0-Skip
YES – Guard
*-Change, 0-Skip
YES – Visitor
*-Change, 0-Skip
YES – Trace User
*-Change, 0-Skip
YES – Card Only
*-Change, 0-Skip
YES – Privileged
*-Change, 0-Skip
YES – Extended Access
*-Change, 0-Skip
Your Name is Ann Brown, (*)-End
Ann Brown
Chapter 2
Alliance system menu
49