GE AL-1103 User Manual page 54

48 Alliance System
User Manual
9. If the user number that you are programming is higher than 1000, and user flags are not displayed in
your system, then all the options available have been programed and the display will return to step 1.
10. If the system has been programmed so that users do not have name files, or if you are programming a
user higher than 200 and user flags are not displayed, see
file names, see
11. If your system is programmed to assign special user flags to the users, they display in sequence.
12. If the user number that you are programming is higher than 1000, then all options available have been
programmed and the display returns to step 1.
Note: You cannot program a user number that already exists.
Table 23 lists the create or change user options.
Table 23. Create or change a user options
Option
Select the number of the alarm group to be issued to this user.
Display the list of alarm groups that you can issue a user (if any).
Move to the next display.
Exit the menu option and return to the original display.
Table 24 lists the start auto disarm test options for each user flag display.
Table 24. Start auto disarm test options for each user flag display.
Option
Change YES to NO, or NO to YES, and display the new setting.
Save the displayed setting and move to the next user flag
display.
Save the displayed setting, skip the remaining user flags, and
move to the next step.
Exit the menu option from Table 25, and return to the original
display.
, Entering a user name
Entering a user pin code
on page 49.
Action
Enter the alarm group number and press ENTER.
Press MENU*.
Press ENTER.
Press CLEAR.
Action
Press MENU*.
Press ENTER.
Enter 0 and press ENTER.
Press CLEAR.
on page 51. With