GE AL-1103 User Manual page 59

9. Enter the correct year (2 digits) (Figure 79).
and press ENTER.
Note: You cannot skip any options. Press ENTER
on each value that does not need to be
changed, until you return to the original
display.
Change to daylight saving time (DST)
To change to daylight saving time, do the following:
1. Press MENU* Figure 1) and enter your user
PIN code and press ENTER
Figure 1).
2. Enter 15 (for menu 15) and press ENTER.
The keypad displays the change to daylight
savings time window (Figure 80).
3. Enter 3 and press ENTER to change the
DST.
4. The display shows the date the time changes
to DST (Figure 81).
5. Enter one of the following:
• 0 = no DST
• 1 = DST starts on first Sunday of the
month
• 2 = DST starts on the second Sunday of
the month
• 3 = DST starts on the third Sunday of the
month
• 4 = DST starts on the fourth Sunday of
the month
• 5 = DST starts on the last Sunday of the
month
6. Press ENTER, ENTER.
7. The display shows the month to start DST
(Figure 82).
8. Enter the month to start DST (2 digits) and
press ENTER, ENTER.
Figure 79. Enter correct year
Time&Date hh:mm:ss dd/mm/yy Xxx..
Year:
Figure 80. Change to daylight savings time
Time 1-Display,2-Set,3-DST,4-Adjust
0-Exit, Menu:
Figure 81. The date time changes to DST
0-Disable, Month 00
Start Sunday
Figure 82. DST start month
5-Last Sunday, Month 00
Start Month:
Chapter 2
Alliance system menu
53