System Menu Option 17, Enable/Disable Service Technician; System Menu Option 18, Reset Cameras - GE AL-1103 User Manual

56 Alliance System
User Manual

System menu option 17, Enable/disable service technician

Use this menu to enable and disable the service technician's code. This menu is to be used when a service
technician or engineer can only gain access to the installer programming menu when this option has been
enabled.
Enable/disable the service technician code
To enable/disable the service technician code, do the following:
1. Press MENU* Figure 1), enter your user
PIN code, and press ENTER Figure 1).
2. Enter 17 and press ENTER. The keypad
displays the enable/disable the service
technician code opening screen (Figure 90).
3. Enter one of the options listed in Table 27.
Table 27. Enable/disable the service technician code options
Enable the service technician's code for the programmed time
period, and exit this menu option.
Cancel the service technician's code, and exit this menu option.
Exit this menu option.
Exit the menu option and return to the original display.

System menu option 18, Reset cameras

Use this menu to reset the film frame count to zero for all camera or change the film frame count on an
individual camera.
Reset the film frame count
To reset the film frame count, do the following:
1. Press MENU* Figure 1).
2. Enter your user PIN code and press ENTER
Figure 1).
3. Enter 18 and press ENTER. The keypad
displays the reset camera opening screen
(Figure 91).
Figure 90. Enable/disable service technician code
0-Cancel, 1-Service in
Option:
Enter 1 and press ENTER.
Enter 0 and press ENTER.
Press ENTER.
Press CLEAR.
Figure 91. Reset camera opening screen
Reset Camera Counts 0-All
Camera No: