GE AL-1103 User Manual page 39

Disarm Camera Test Report. If all cameras tested successfully the display shows:
To display the disarm camera test report, do the following:
1. Press ENTER (Figure 1) to exit the menu.
2. If untested cameras are reported the display
shows the untested camera report
(Figure 27).
Table 16 lists the display options.
Table 16. Disarm test report options
Option
Display the complete zone name.
Update the zone list and display the next zone on the list (if any).
Exit this menu option.
Exit the menu option and return to the original display.
Arm test report
If you selected Arm Test, the display depends on the status of the zones.
If all zones tested successfully the display shows:
To display the arm test report, do the following:
1. Press ENTER (Figure 1) to exit the menu.
2. If untested zones are reported, the displays
shows a list of untested zones either one at a
time (Figure 28) or as a list of zone numbers
(Figure 29).
All Cameras Tested Successfully
Press ENTER
Figure 27. Untested camera report
Untested Camera 1
NEXT or ENTER
Action
Enter the zone number and press ENTER.
Press ON/NEXT.
Press ENTER.
Press CLEAR.
No Untested Zones
Press ENTER
Figure 28. Arm test report one at a time
Untested Arm On 17, Rear Door Contact
NEXT or ENTER
Figure 29. Arm test report list of zone numbers
Untested Arm On 9, 14, 17
Zone No:
Chapter 2
Alliance system menu
33