Command Center (Settings For E-Mail) - Kyocera TASKalfa 420i Operation Manual

Preparation before Use

COMMAND CENTER (Settings for E-mail)

COMMAND CENTER is a tool used for tasks such as verifying the operating status of the machine and changing
the settings for security, network printing, E-mail transmission and advanced networking.
NOTE:
Here, information on the FAX settings has been omitted. For more information on using the FAX, refer
to the Fax Kit Operation Guide.
The procedure for accessing COMMAND CENTER is explained below.
1
Launch your Web browser.
2
In the Address or Location bar, enter the machine's IP address.
E.g.) http://192.168.48.21/
The web page displays basic information about the machine and COMMAND CENTER as well as their
current status.
3
Select a category from the navigation bar on the left of the screen. The values for each category must be
set separately.
If restrictions have been set for COMMAND CENTER, enter the correct user name and password to access
pages other than the startup page.
For details, refer to the KYOCERA COMMAND CENTER Operation Guide.
2-16
Downloaded from www.Manualslib.com manuals search engine
OPERATION GUIDE