[File Server] Tab - Sony HVO-1000MD User Manual

[Obtain DNS server address automatically]
In the [Obtain DNS server address automatically]
screen that appears, select [Yes] to obtain the IP
address for the DNS server automatically, or select
[No] to specify the IP address manually, and then press
the ENTER button.
If you select [No], be sure to configure the [Preferred
DNS Server] and [Alternate DNS Server] settings.
[Preferred DNS Server]
Enter the IP address for the preferred DNS server
using the on-screen keyboard.
If you do not have nor need a preferred DNS server, do
not configure this setting.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 35).
[Alternate DNS Server]
Enter the IP address for the alternate DNS server using
the on-screen keyboard.
If you do not have nor need an alternate DNS server,
do not configure this setting.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 35).
5
To configure settings in other tabs, use the V , v , B ,
and b buttons to select a tab.
If you are finished configuring [Network Settings], use
the V , v , B , and b buttons to select [Apply], and press
the ENTER button to save the configurations.

[File Server] Tab

Configure these settings when specifying a server as the
storage location for recorded data.
The [FTP] and [Share (CIFS)] settings are available for the
file server configuration.
To configure an FTP server
1
Use the B and b buttons to select the [File Server] tab.
2
Use the V and v buttons to select the [Server] box, and
press the ENTER button.
The [Server] screen appears.
3
Use the V and v buttons to select [FTP], and press the
ENTER button.
Settings items for the FTP server appear.
4
Configure each setting.
Select an item using the V and v buttons, and press the
ENTER button to display the setting screen for that
item.
[Server Name]
Enter the server name using the on-screen keyboard.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 35).
[Base Folder]
Enter the name of the base folder using the on-screen
keyboard.
101
Network Settings