Recording Preparation; Patient Information And Data Storage Settings - Sony HVO-1000MD User Manual

Recording Preparation

Before starting to record, enter information regarding the
patient of the surgical procedure or examination, configure
the storage destination and quality settings for recorded
data, and then perform a test recording.
You can also register information for multiple patients in
advance, and simply recall the corresponding patient
information on the day of the procedure or examination.
You can prepare for recording and test record in the
[Recording Preparation] screen.
Patient Information and Data
Storage Settings
Enter information regarding the patient of the surgical
procedure or examination, and configure the storage
destination and quality settings for recorded data.
1
Press the MENU button.
The [MENU] screen appears.
2
Use the V and v buttons to select [Recording
Preparation], and press the ENTER button.
The [Recording Preparation] screen appears.
50
Recording Preparation
3
Enter patient information.
Select an item using the V , v , B , and b buttons, and
press the ENTER button to display the setting screen
for that item.
[Patient Info] entry can be skipped.
[Patient ID]
Enter an identification number for the patient using the
on-screen keyboard.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 35).
Note
Certain symbols (\ / : ? * " < > | .) cannot be used for
the patient ID. When data is scanned with a card reader
or other such device and these characters exist, the
characters will be automatically replaced with
underscores (_). In addition, the front panel will not
display characters other than ASCII characters 0x20 to
0x7D.
[Patient Name]
Enter up to 20 characters in each field of the patient's
name (1 character for the middle name) using the on-
screen keyboard.
For details on the input fields for the patient name, see
"[Patient Name Field]" (page 79).
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 35).
[Sex]
Select the patient's gender in the setting screen that
appears, and press the ENTER button.