[Recording Date]
Select whether to output the recording date and time as
metadata.
[Patient Info.]
Select whether to output patient information (patient
ID, patient name, gender, date of birth) as metadata.
[Doctor]
Select whether to output the name of the doctor as
metadata.
[Case]
Select whether to output the procedure information as
metadata.
[Facility Name]
Select whether to output the name of the facility as
metadata.
[Metadata Format]
Select [XML] or [TXT].
The default setting is [TXT].
[Encryption]
Displays whether metadata outputs are encrypted
(based on the setting in the [System Admin Settings]).
[Key]
Displays the key as asterisks (*) if [Encryption] is set
to [Yes] in the [System Admin Settings].
5
When you finish configuration, use the V , B , b , and v
buttons to select [Apply], and press the ENTER
button.
The [Settings] screen appears again.
Configuring Print Settings
Configure print settings for still images.
The settings that appear will vary depending on the printer
you are using. The Sony UP-DR80MD is used as an
example for the explanation in this section.
Note
You can select the printer for use from the [System Admin
Settings] screen – [Device Settings] screen – [Device] tab.
For details on this setting, see “[Device] Tab” (page 90).
Page 32