Table of Contents
Advertisement
[Save to]
Select the selection state of recorded data when you
specify [Save to] for [Operation].
The default setting is [Deselect All].
[Print]
Select the selection state of recorded data when you
specify [Print] for [Operation].
The default setting is [Deselect All].
To import a logo
Import the logo file you want to display.
For details on preparing a logo file, see “To prepare a
logo file” (page 82).
1
Copy the logo file onto a USB memory device, and
insert the device into a USB port on the unit.
2
Use the B and b buttons to select [Import], and press
the ENTER button.
The following message appears.
3
Select [OK], and press the ENTER button.
When import of the logo file is complete, a notification
message will appear.
To prepare a logo file
To display a logo, prepare a logo file that can be imported
to the unit and copy it onto a USB memory device
beforehand.
1
Prepare the logo file.
The logo file must meet the following conditions.
File format: 24-bit bitmap
File name: MenuLogo.bmp
Size: 43 (height) × 400 (width) pixel
Background: RGB (102, 102, 102) gray
2
Copy the logo file onto a USB memory device.
Create a folder with the following name in the
uppermost directory of the USB memory device, and
copy the logo file.
Folder name: DisplayLogo
[Video 1] Tab
Configure recording settings.
1
Use the B and b buttons to select the [Video 1] tab.
2
Configure each setting.
Select an item using the V and v buttons, and press the
ENTER button to display the setting screen for that
item.
[Video Format]
Select [NTSC] or [PAL] in the setting screen that
appears, and press the ENTER button.
The default setting is [NTSC].
Page 82
- Quick Links:
- Copying to External Media
- Error Messages
Hide quick links:
Advertisement
Table of Contents
