[Network] Tab - Sony HVO-1000MD User Manual

[Network] Tab

Configure these settings when using a network.
1
Use the B and b buttons to select the [Network] tab.
2
Use the V and v buttons to select the [Network] box,
and press the ENTER button.
The [Network] screen appears.
3
Use the V and v buttons to select [Use], and press the
ENTER button.
4
Configure each setting.
Select an item using the V and v buttons, and press the
ENTER button to display the setting screen for that
item.
100
Network Settings
[Obtain an IP address automatically]
In the [Obtain an IP address automatically] screen that
appears, select [Yes] to use the DHCP to obtain an IP
address automatically, or select [No] to assign a static
IP address manually, and then press the ENTER
button.
If you select [Yes], the IP address, subnet mask, and
default gateway will be displayed as read-only.
If you select [No], be sure to configure the [IP
Address], [Subnet Mask], [Default Gateway],
[Preferred DNS Server], and [Alternate DNS Server]
settings.
[IP Address]
Enter the IP address using the on-screen keyboard.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 35).
[Subnet Mask]
Enter the subnet mask using the on-screen keyboard.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 35).
[Default Gateway]
Enter the IP address for the default gateway using the
on-screen keyboard.
If you are only using a local network and not
connecting to other networks, do not configure this
setting.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 35).