Black File Installation Menu (D4) - Sony Betacam SX DNW-A100 Maintenance Manual

Example of display and operation (D3)
Superimpose picture
DISK MAINTENANCE MODE
D3:INSTALLATION
*
[ID-00] LA136291 ( )
[ID-01] LA046473 ( )
INITIALIZE all the HDDs
marked above at a time.
------------------------
Confirm the serial No.!!
Select all HDDs replaced
while showing (MARK).
0 [JOG] + DIAL(2)
DISK MAINTENANCE MODE
D3:INSTALLATION
*
[ID-00] LA136291 (MARK)
[ID-01] LA046473 ( )
INITIALIZE all the HDDs
marked above at a time.
------------------------
Confirm the serial No.!!
Select all HDDs replaced
while showing (MARK).
0
(omitted)
0
DISK MAINTENANCE MODE
D3:INSTALLATION
[ID-00] LA136291 (MARK)
[ID-01] LA046473 ( )
*
INITIALIZE all the HDDs
marked above at a time.
------------------------
Confirm the serial No.!!
Select all HDDs replaced
while showing (MARK).
0 [SET]
DISK MAINTENANCE MODE
D3:INSTALLATION
[ID-00] LA136291 (MARK)
[ID-01] LA046473 ( )
*
Executing ...
------------------------
Confirm the serial No.!!
Select all HDDs replaced
while showing (MARK).
0
DISK MAINTENANCE MODE
D3:INSTALLATION
*
[ID-00] LA136291 (DONE)
[ID-01] LA046473 ( )
------------------------
All the marked HDDs have
been initialized.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
Time data display area
_ID-00_
LA136291
_ID-00_
MARK
_ID-01_
LA046473
INITIALI
ZE
D3- EXEC
UTING
_ID-00_
DONE

4-3-6. BLACK File Installation Menu (D4)

The D4 : BLACK INSTALLATION menu is used when a
BLACK file is manually written in the zone of the hard
disk that is set to the enable state by this unit.
(This menu is applied to the unit in which the SSX ROM
version is 3.10 or later.)
n
In general, a BLACK file is automatically created when
F5: DELETE ALL FILE is executed in a disk file manage-
ment menu.
(For details of the disk file management menu, refer to
Section 7-4 in the Operation Manual.)
The D4 : BLACK INSTALLATION menu may be select-
ed after the maintenance mode is activated or may be
automatically activated after the power is turned on.
In the following three cases, the D4: BLACK INSTALLA-
TION menu is automatically activated after the power is
turned on.
. When the connected BKNW-116 is first used after
factory-shipping
(The factory-shipped BKNW-116 has no BLACK file.)
. When the zone size of BKNW-116 is changed in the D5
: ZONE CONFIGURATION menu of the maintenance
mode
. When the zone is changed from FULL to HALF-1 or
HALF-2 in the emergency zone configuration menu
displayed in case that system error D8 (sub-error code 84
: hardware error of hard disk) occurs
(For details of the emergency zone configuration menu,
refer to the Operation Manual.)
BLACK file
The BLACK file is required when editing is performed
using a nonlinear editing machine (DNE-50/700). The
header based on this BLACK file is indispensable to
reproduce the program created during editing.
The BLACK file itself cannot be deleted.
4-3. DISK Maintenance Mode (M1)
4-3-5. HDD Installation Menu (D3)
4-3-6. BLACK File Installation Menu (D4)
4-77