Configuring Image Quality Settings - Sony HVO-1000MD User Manual

Configuring Image Quality Settings

Configure image quality settings for videos and still
images.
1
Use the B and b buttons to select the [Quality] tab.
Note
The values that appear for [Rec Time] and [Rec
Quantity] are estimates for single-layer BDs (25 GB).
2
Configure the video settings.
1 Use the v button to select the [Quality] box, and
press the ENTER button.
The [Quality] screen appears.
2 Use the V and v buttons to select the image quality,
and press the ENTER button.
The [Quality] screen closes, and the [Quality] tab
appears again.
Note
The setting configured here will be used as the initial
value for the [Video Quality] setting in the [Recording
Preparation] screen.
3
Configure the still image settings.
1 Use the b button to select the [Format] box, and
press the ENTER button.
The [Format] screen appears.
2 Use the V and v buttons to select a format for the
still image files, and press the ENTER button.
The [Format] screen closes, and the [Quality] tab
appears again.
Note
If [DICOM] is set to [Use] in the [System Admin
Settings] screen - [DICOM Settings] screen -
[Server] tab, the format setting for still images will
be disabled and fixed at [JPEG].
Configuring Recording Settings (User Settings)
29