Names And Functions Of Parts; Front - Sony HVO-1000MD User Manual

Names and Functions of Parts

Front

qh
CAUTION
Do not touch the laser pickup inside the BD drive
The discharge of static electricity that may result from
touching the pickup may cause the drive to hang up,
preventing the ability to write data. If a hang up occurs, try
turning the recorder off and turning it on again.
A Front panel display
Displays the current status and messages.
B Menu navigation buttons
Use these to navigate menus.
MENU button
Display or hide the menu.
V button
Use this to move the cursor up or select an item that is
above the current item.
B / m button
Use this to move the cursor left or select an item that is
to the left of the current item.
You can also use this button to rewind during playback
of recorded data.
20
Names and Functions of Parts
1
qg qf qd qs
2 3
qa 0
v button
Use this to move the cursor down or select an item that
is below the current item.
b / M button
Use this to move the cursor right or select an item that
is to the right of the current item.
You can also use this button to fast forward during
playback of recorded data.
ENTER button
Use this to confirm a currently selected menu or item,
and execute operations.
C
CAPTURE button
Use this to capture still images.
A chapter separator is also created at the position in
which the still image was captured.
For details on use, see "Capturing Still Images"
(page 46).
D z REC button
Use this to start video recording.
"REC" appears on the front panel display during
recording, in addition to the recording time.
For details on use, see "Manual Recording"
(page 44).
4 56
9 8 7