Sony HVO-1000MD User Manual page 81

[Show Rec Status]
Select whether to display recording status information
in the setting screen that appears, and press the
ENTER button.
If you select [Yes], the recording status, the status of
data transfer to media, and other status information
will appear on the recording images that are output.
Data is being written if the media status is green, and
an error has occurred if it is orange.
The default setting is [No].
[Show Play Status]
Select whether to display playback status information
in the setting screen that appears, and press the
ENTER button.
If you select [Yes], patient information and other data
will appear on the playback images of video outputs.
The default setting is [No].
[Show Idle Status]
Select whether to display idle status information in the
setting screen that appears, and press the ENTER
button.
If you select [Yes], streaming, printing, and other
status information will appear during idle conditions
(i.e., when recording or playback is stopped). Green
indicates streaming or printing in progress, and orange
indicates errors.
The default setting is [No].
Note
If [Show Rec Status] or [Show Idle Status] is set to
[Yes] while [I/O Timing] is set to [Pass-Through], the
status information will not be displayed. In addition,
status information will not be updated during the auto
live function.
To configure advanced image list settings
Specify the selection state of recorded data when you
perform copy or print operations in the [Image List]
screen.
Note
[Advanced] for [Image List Display] cannot be selected in
touch panel mode.
1
Use the B and b buttons to select [Advanced], and
press the ENTER button.
The [Advanced] settings screen appears.
2
Configure each setting.
Select an item using the V and v buttons, and press the
ENTER button to display the setting screen for that
item.
81
Function Settings