Sony HVO-1000MD User Manual page 92

5
After confirming that the decoding results are correct,
use the B and b buttons to select [Apply], and press the
ENTER button.
The configurations are saved, and the [Device] tab
appears again.
To configure printer settings
When a USB printer is selected, configure the color
balance, brightness, and other settings.
1
Use the B and b buttons to select [Advanced], and
press the ENTER button.
[Advanced] appears when a printer is selected.
The [Printer Settings] screen appears.
2
Configure each setting.
Select an item using the V and v buttons, and press the
ENTER button to display the setting screen for that
item.
92
Device Settings
[Color Balance]
Adjust the color balance for cyan, magenta, and
yellow and red, green, and blue.
Select a correction value in the setting screens that
appear, and press the ENTER button.
[Gray Balance]
Adjust the balance for achromatic colors.
Select a correction value in the setting screens that
appear, and press the ENTER button.
[Bright]
Configure the [Sharpness], [Dark], [Gamma], [Light],
and [Gamma Curve] settings to adjust the brightness
of printed images.
Select a correction value in the setting screens that
appear, and press the ENTER button.
Note
The [Gamma Curve] setting is only available for Sony
UP-D25MD printers.