Table of Contents
Advertisement
Network Settings
Configure initial settings for the network and server.
1
Select [Network Settings] in the [System Admin
Settings] screen, and press the ENTER button.
The [Network Settings] screen appears.
2
Select a tab, and press the ENTER button.
3
Configure the settings in each tab as necessary.
For details on each tab, see the following.
[Network] Tab (page 72)
[IP Address] Tab (page 72)
[DNS Server] Tab (page 72)
[File Server] Tab (page 72)
[Shared] Tab (page 73)
[NTP] Tab (page 73)
4
When you finish configuration, select [Apply] and
press the ENTER button.
The configurations are saved, and the [System Admin
Settings] screen appears again.
[Network] Tab
Configure these settings when using a network.
[Network]
Select whether to use a network.
The default setting is [Not Used].
If you selected [Use], configure the settings in each tab as
necessary.
[IP Address] Tab
[Obtain an IP address automatically]
Select [Use] to use the DHCP to obtain an IP address
automatically, or select [Not Used] to assign a static IP
address manually.
If you selected [Use], the IP address, subnet mask, and
default gateway will be displayed as read-only.
If you selected [Not Used], be sure to configure the [IP
Address], [Subnet Mask], and [Default Gateway]
settings.
[IP Address]
Enter the IP address.
[Subnet Mask]
Enter the subnet mask.
[Default Gateway]
Enter the IP address for the default gateway.
If you are only using a local network and not connecting
to other networks, do not configure this setting.
[DNS Server] Tab
[Obtain DNS server address automatically]
Select [Use] to obtain the IP address for the DNS server
automatically, or select [Not Used] to specify the IP
address manually.
If you selected [Not Used], be sure to configure the
[Preferred DNS server] and [Alternate DNS server]
settings.
[Preferred DNS server]
Enter the IP address for the preferred DNS server.
If you do not have nor need a preferred DNS server, do
not configure this setting.
[Alternate DNS server]
Enter the IP address for the alternate DNS server.
If you do not have nor need an alternate DNS server, do
not configure this setting.
[File Server] Tab
Configure these settings when specifying a server as the
storage destination for recorded data.
[Server]
Select [Common Setting (Share)] to specify a server as
the storage destination.
The default setting is [Not Used].
If you selected [Common Setting (Share)], be sure to
configure the share name and other settings in the
[Shared] tab.
For details on this setting, see "[Shared] Tab" (page 74).
[Server Name]
Enter the server name.
[Share Name]
Enter the share name.
Use only alphanumeric characters and symbols
(excluding " = / \ [ ] : | < > + ; , ? *).
72
Advertisement
Table of Contents
