Sony HVO-1000MD User Manual page 122

10
Configure each setting.
Select an item using the V and v buttons, and press the
ENTER button to display the setting screen for that item.
[Display Cursor]
Select whether to display the mouse cursor on the
screen during touch panel / mouse mode.
Select [Yes] or [No] in the setting screen that appears,
and press the ENTER button. The default setting is [No].
Restart the unit to apply changes to this setting.
[Calibration]
Select whether to calibrate the touch panel monitor so
that the position of the mouse cursor corresponds with
your touch during touch panel operations.
If you select [Yes], the unit will restart and the
calibration settings screen will appear at startup.
Follow the instructions on the screen that appears to
perform calibration.
Notes
• Always perform calibration when using a touch panel
monitor for the first time. A beeping sound will be
emitted with each touch until calibration is complete.
The calibration process will require you to restart the
unit multiple times.
• Perform calibration again whenever you notice a
decrease in touch accuracy.
• For details on how to perform calibration, contact
your local Sony representative.
11
After editing the settings, select [Apply] and press the
ENTER button.
Follow the instructions in the message that appears,
connect the touch panel monitor or mouse, and turn on
the unit.
122
Configuring Touch Panel / Mouse Settings