Function Settings; [General 1] Tab - Sony HVO-1000MD User Manual

Function Settings

Configure initial settings related to recording and external
devices.
1
In the [System Admin Settings] screen, use the V , v ,
B , and b buttons to select [Function Settings], and
press the ENTER button.
The [Function Settings] screen appears.
2
Use the B and b buttons to select a tab, and configure
settings as necessary.
For details on each tab, see the following.
"[General 1] Tab" (page 78)
"[General 2] Tab" (page 79)
"[Video 1] Tab" (page 82)
"[Video 2] Tab" (page 85)
"[PinP] Tab" (page 86)
Note
When the HVO-3000MT is set to 3D mode, the [PinP]
tab does not appear.
78
Function Settings
3
When you finish configuration, use the V , v , B , and b
buttons to select [Apply], and press the ENTER
button.
The configurations are saved, and the [System Admin
Settings] screen appears again.

[General 1] Tab

Configure initial system settings.
1
Use the B and b buttons to select the [General 1] tab.
2
Configure each setting.
Select an item using the V and v buttons, and press the
ENTER button to display the setting screen for that
item.
[Facility Name]
Enter the facility name (up to 32 characters) using the
on-screen keyboard.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 35).
[Digits in Patient ID]
Select the number of digits to use for patient ID
numbers in the setting screen that appears, and press
the ENTER button.
The default setting is [8]. Up to 16 digits can be used.