Sony HVO-1000MD User Manual page 84

[Recording Mode]
Select the recording mode in the setting screen that
appears, and press the ENTER button.
The default setting is [HD/SD Record].
[HD Record]
Upconvert SD signals and record in HD mode.
[HD/SD Record]
Record in HD or SD mode based on the input
resolution.
[SD Record]
Downconvert HD signals and record in SD mode.
The relationship between the input resolution and
recording mode is as follows.
Input [HD
resolution Record]
640 × 480 to 1920 × 1080i 720 × 480 (576) i 720 × 480 (576) i
720×480 (576)
800 × 600 to 1920 × 1080i 1920 × 1080i
1280 × 1024
1920 × 1080i 1920 × 1080i 1920 × 1080i
1920 × 1080p to 1280 × 720p
1920 × 1200 1920 × 1080p
Notes
• If the input is interlaced, the data will be recorded in
interlaced format regardless of whether the
recording mode is set to HD progressive.
• When the HVO-3000MT is set to 3D mode, the
recording mode will be fixed at [HD Record].
• When the HVO-3000MT is set to 3D mode, the
supported input resolutions are 1920 × 1080, 1280 ×
1024, and 1024 × 768.
[HD Recording Format]
Select the HD format to use during recording in the
setting screen that appears, and press the ENTER
button.
The default setting is [1080i].
Note
Only the HVO-3000MT supports 1080p.
84
Function Settings
[HD/SD [SD Record]
Record]
720 × 480 (576) i
720 × 480 (576) i
1280 × 720p 720 × 480 (576) i
1920 × 1080p
The relationship between the input resolution and HD
format during recording is as follows.
Input resolution 1080i mode 720p mode 1080p mode
1920 × 1080p 1920 × 1080i 1280 × 720p 1920 × 1080p
[Audio]
Select whether to record audio in the setting screen
that appears, and press the ENTER button.
The default setting is [Record].
3
To configure settings in other tabs, use the V , v , B ,
and b buttons to select a tab.
If you are finished configuring [Function Settings],
use the V , v , B , and b buttons to select [Apply], and
press the ENTER button to save the configurations.