Editing Patient Information - Sony HVO-1000MD User Manual

[Save 3D Still] (HVO-3000MT only)
Select whether you will save still images in 3D format,
and press the ENTER button.
[Save 2D Still] (HVO-3000MT only)
Select whether you will save still images in 2D format,
select the input if so, and press the ENTER button.
Note
This setting will be applied to 3D still images.
10
Use the V and v buttons to select [Execute], and press
the ENTER button.
66
Processing Recorded Data
Copying of recorded data starts.
Note
To cancel copying, select [Abort] and press the
ENTER button.
11
Use the v button to select [Close], and press the
ENTER button.
The [Image List] screen appears again.

Editing Patient Information

You can edit the ID, name, and other patient information
that is attached to recorded data and not yet configured.
CAUTION
When [Change Patient Info.] is set [No] in the [System
Admin Settings] screen - [Function Settings] screen -
[General 1] tab, you can only edit patient information that
has not yet been entered. Patient information entered by a
user cannot be edited.