Inserting And Removing Discs - Sony HVO-1000MD User Manual

Storage
• Do not store discs where they may be subjected to direct
sunlight, or in other places where the temperature or
humidity is high.
• Store discs in their cases.
• Finger prints or dust accumulated on the disc cause
deterioration of picture quality. Keep the disc clean.
Cleaning
• Clean the disc with a soft cloth, wiping it from the center
out. If the dust is heavy, wipe it with a soft cloth
moistened with water, then wipe off the water with a dry
cloth.
• Do not use solvents such as benzene, thinner,
commercially available record cleaners, or anti-static
spray. Using these products may damage discs.

Inserting and Removing Discs

To insert a disc
1
Press the 1 (standby) switch to exit standby mode.
1 (standby) switch
"WELCOME" appears on the front panel display.
When the "READY" message appears, proceed to the
following steps.
CAUTION
If the front panel display does not turn on when you
press the 1 (standby) switch, make sure that the main
power switch on the rear panel of the unit is set to the
? (on) position.
For details on turning the unit on and off, see
"Turning the Unit On and Off" (page 26).
2
Press the Z (disc tray) button.
The disc tray opens.
3
Insert the disc.
Data side facing down
4
Gently push in the disc tray.
The disc tray closes.
When an incompatible disc is inserted
The BD/DVD indicator lights orange, and a message
notifying you of the incompatible media appears on the
menu screen. Remove the disc, and insert a compatible
disc.
To remove a disc
1
Press the Z (disc tray) button while the unit is turned
on.
The disc tray opens.
2
Remove the disc.
3
Gently push in the disc tray to close it.
Z (disc tray) button
37
Handling Discs