Sony HVO-1000MD User Manual page 104

2
Use the V and v buttons to select the [Streaming] box,
and press the ENTER button.
The [Streaming] screen appears.
3
Use the V and v buttons to select [Use], and press the
ENTER button.
Settings items for the streaming function appear.
4
Configure each setting.
[User Name]
Enter a user name using the on-screen keyboard.
Use only alphanumeric characters.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 35).
[Password]
Enter the password using the on-screen keyboard.
Use only alphanumeric characters.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 35).
104
Network Settings
[Port No.]
Enter the port number using the on-screen keyboard.
The default setting is [554].
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 35).
[Send Audio]
Select whether to transmit audio in the setting screen
that appears, and press the ENTER button.
The default setting is [Yes].
[WS Discovery]
Select whether to enable location of the unit on the
network by the Network Recorder and Network
Recorder Software using WS-Discovery in the setting
screen that appears, and press the ENTER button.
The default setting is [Use].
The [Streaming] tab appears again.
5
To configure settings in other tabs, use the V , v , B ,
and b buttons to select a tab.
If you are finished configuring [Network Settings], use
the V , v , B , and b buttons to select [Apply], and press
the ENTER button to save the configurations.
To configure advanced streaming settings
Configure settings on this unit that are related to streaming
on the Network Recorder and Network Recorder Software.
Note
Advanced settings for streaming can only be configured
during idle conditions. They cannot be configured during
recording or playback.