Disk File Management Menu; Items In The Disk File Management Menu - Sony DNW-A100 Operation Manual

7-4 Disk File Management Menu

7-4-1 Items in the Disk File Management Menu

The disk file management menu contains the following
items.
In the "Settings" column of the table, the factory
default settings are indicated by an enclosing box.
Item number Item name
F1 SELECT RECORD TYPE
F2 CONVERT TYPE
(S ˜ F)
F3 SELECT GOP/FRAME
F4 DELETE PROGRAM
F5 DELETE ALL FILE
a) GOP: abbreviation of "Group Of Pictures". This is the
number of frames in the unit for carrying out video data
compression. For Betacam SX, video data is compressed
taking two frames as a unit.
Settings
For recording and editing using the hard disk, select full edit mode or simple edit
mode.
FULL : Full edit mode.
SIMPLE: Simple edit mode.
Note
Make this setting before carrying out any file creation. If there are already any
recorded files, it is not possible to change this setting.
Set this to ON to convert the type of files recorded on the hard disk (conversion
between files recorded in full edit mode and files recorded in simple edit mode).
Note
The conversion from a file recorded in simple edit mode to the full edit mode
format takes a total of between 1/2 and 1/3 of the time required to record the
original file.
For a program created in simple edit mode (when F1 is SIMPLE), select the
editing accuracy (GOP: ±1 frame; FRAME: ±0 frame).
GOP: Carry out editing in GOP
FRAME: Carry out editing in frame units. The editing accuracy is ±0 frame.
Set this to ON to delete the program from the hard disk (DISK PROGRAM).
Files in DISK MASTER are not deleted.
Set this to ON to delete the program and all files from the hard disk (DISK
PROGRAM and DISK MASTER).
a) units. The editing accuracy is ±1 frame.
Chapter 7 Menu System
7-25