Christie CP4230 Setup Manual page 26

Section 2: Installation and Setup
7. Install the cover with the screws.
NOTE: Make sure the cover is between the mounting tabs.
8. Connect the harness wires.
9. Position the lens clamp DOWN to lock the lens assembly in place.
10. Calibrate the lens. See
11. Install the shroud.
2-14
Figure 2-18
Figure 2-19
Figure 2-20
Section 4.3 Basic Image Alignment for details.
CP4230 Setup Guide
020-100669-03 Rev. 1 (05-2014)