Lamp Management; Runtimes; Mode - Barco iD LR-6 R9010342 User Manual

6. Advanced
7. Press ENTER
The logo display is only possible in the full screen mode, a logo can thus not be displayed (rescaled) in a
window in the PiP mode.
When there is no signal connected, the projector will also start its standby timer countdown (if enabled) and
shuts down after the predetermined time.
6.7

Lamp management

6.7.1

Runtimes

How to display the lamp runtimes ?
1. Press MENU to activate the Toolbar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Runtimes
Image 6-78
5. Press ENTER
A textbox is displayed
Image 6-79
6.7.2

Mode

What are the different lamp modes ?
Single mode
The projector will always switch to the lamp with the shortest runtime when the difference between the runtimes of lamp1 and lamp
2 reaches 100 hours, switching from one lamp to another happens only at switching on of the projector and not during operation.
84 R59770134 ID LR-6 27/05/2011