Blanking Adjustment - Barco XLM H25 Owner's Manual
Hide thumbs
Also See for XLM H25:
- Supplementary manual (2 pages) ,
- Specfications (4 pages) ,
- Owner's manual (133 pages)
Table of Contents
Advertisement
Image 6-17
Keystone adjustment
How to adjust the keystone
1. Push the cursor key ↑ or ↓ to highlight Keystone. (menu 6-68)
2. Press ENTER to select.
3. Push the cursor key ← or → to adjust the keystone of the image.
When the upper part of the image is wider than the lower part of the image, push the cursor key ←. The value indication below
the bar scale will be negative.
When the upper part of the image is smaller than the lower part of the image, push the cursor key →. The value indication below
the bar scale will be positive.
LAYOUT ADJUSTMENT
LOAD
RENAME
DELETE
ADD WINDOW
REMOVE WINDOW
EDIT WINDOW
KEYSTONE
BLANKING
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-68
6.6.9
Blanking adjustment
What can be done ?
Blanking adjustments affect only the edges of the complete projected image and are used to frame the projected image on to the
screen and hide or blank out unwanted information (or noise). A '0' on the bar scale indicates no blanking.
Which blanking adjustments are available ?
•
top blanking
•
bottom blanking
•
left blanking
•
right blanking
R5976690 XLM H25 03/09/2004
6. Adjustment Mode
75
Advertisement
Table of Contents
